10
battery compartment door from the HammerJack, you can find the wiring harness taped to the upper right
side of the battery compartment.
7-2 Using the Fox Jack 4 Decoy
The included Fox Jack 4 decoy mounts directly to the back of the HammerJack game call. You can then
control the action of the Fox Jack 4 with the TX915 remote control and through FOXCAST sequences.
Combining the use of a decoy with the effective sounds on the HammerJack provides you with a well-
rounded predator calling combination. After fooling their ears, the decoy will fool their eyes.
Connecting the Fox Jack 4 Decoy to the HammerJack
1.
Connect the Fox Jack 4 to the back of the HammerJack by joining the 3-pin connector on the Fox
Jack 4 to the decoy wiring harness.
2.
Secure the Fox Jack 4 to the HammerJack housing by inserting the tabs into the slots and then
tightening the knurled thumbscrew.
Turning on and Activating the Fox Jack 4 Decoy
1.
Ensure the Fox Jack 4 is properly connected to the HammerJack.
2.
Turn on the HammerJack game call and the TX915 remote control. Be aware that the
HammerJack must be turned on in order to power the Fox Jack 4 decoy.
3.
Locate the three-position slide switch on the side of the Fox Jack 4.
4.
Move the switch from the off position to the first on position. The second on position turns on
the integrated LED, which can be useful in nighttime operation to provide subtle illumination to
the decoy.
5.
Using the TX915, push the auxiliary button a single time. The Fox Jack 4 should begin moving. To
stop the motion, push the auxiliary button again.
8.
TX915 Detailed Overview
This section covers the TX915 in detail, including breakdowns and explanations of each menu item.
Summary of Contents for Hammerjack
Page 1: ......