background image

5

102

9. Windows will display the partition of your system, you have to create partitions as 

many as you wish, assign them C:, D: or E: drive names. After partitions were done, 
you can press <Enter> to continue. It will ask you to format your hard disk, then 

copy files...etc., until the whole Windows is setup.

10. You must always keep RAID diskette in the floppy drive during Windows XP 

installation, otherwise, Windows may ask you to put it inside again by below 

message. There are many times Windows XP may copy files from the floppy drive, 

please remember. 

11. Follow the Windows XP install processes to finish the set up.

Windows XP Professional Setup

 

  The following list shows the existing partitions and

  unpartitioned space on this computer.

  Use the UP ad DOWN ARROW keys to select an item in the list.

   

●  To set up Windows XP on the selected item, press ENTER.

   

●  To create a partition in the unpartitioned space, press C.

   

 ●  To delete the selected partitions, press D.    

      476938 MB Disk 0 at id 0 on bus 0 on iaStor [MBR]

  ENTER=Install     C=Create Partition     F3=Quit

Unpartitioned space 

476938     MB

Windows XP Professional Setup

Insert the disk labeled:

Intel Matrix Storage Manager driver

into drive A:

*  Press ENTER when ready

   F3=Quit    ENTER=Continue

Summary of Contents for Q45M Series


















































































































Reviews: