Foxconn Q45M Series User Manual Download

Page: 80 / 113

1. Find a PC, put a diskette into its floppy

drive A:, this diskette will be formatted later.
Put the driver CD into DVD-ROM drive.

2. Depending on which platform your system

is, normally, it is a 32-bit XP system. Use
Windows explorer, and go to

CD:\Driver\

Intel\RAID\floppy\32bit

, click on

Raid-

Tool

icon to start the creation.

3. Click "GO" to start.

4. Select the desired destination FDD drive.

It can be the default drive A: or any USB
FDD. Click "OK" to continue.

5. Insert a diskette, click "OK" to continue.

5-1 Create a RAID driver diskette

If you want to install a brand new Windows XP on a AHCI or RAID system, you need to

configure the SATA Mode in BIOS to either AHCI or RAID first. You also need to create

a RAID driver diskette for use in installing your Windows XP system.

Windows Vista has native RAID driver in itself, you can skip these steps.

Summary of Contents for Q45M Series


















































































































Search results

Summary of Contents for Q45M Series

Reviews:

Related manuals for Q45M Series

Brands by name

Popular brands

Foxconn Q45M Series, User Manual

Search results

Summary of Contents for Q45M Series

Reviews:

Related manuals for Q45M Series

Brands by name

Popular brands