Foxconn M7VMX series User Manual Download

Page: 46 / 107

PC Health Status

► Case Open Warning

This item is used to enalbe or disable case open warning function.

► Shutdown Temperature

This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.

► CPU Vcore/VTT(V)/+ 3.3V/+5V/+12V/5VSB(V)/Voltage of Battery

The current voltages are automatically detected and displayed by the system.

►

CPU/System Temperature

The CPU/System temperature are automatically detected and displayed by the system.

► CPU Fan/System Fan Speed

The CPU fan/System fan speed are automatically detected and displayed by the system.

►

Smart fan Control

This option is used to enable or disable smart fan function. Only when this option is enabled,
you can set some correlative parameters.

► Start PWM Temperature

It allows you set a temperature value from which smart fan starts its operation.

►

Start PWM Value

It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
PWM value and smart fan begins its operation. The higher PWM value can achieve the faster
fan speed.

►

Slope PWM Value

When temperature changes one degree celsius, the PWM will be increased or decreased by a
step value accordingly.

Phoenix - AwardBIOS CMOS Setup Utility

PC Health Status

Case Open Warning

[Disabled]

Item Help

Shutdown Temperature

[Disabled]

CPU Vcore

1.29 V

Menu Level ►

VTT(V)

1.82 V

+3.3V

3.31 V

+5V

4.99 V

+12V

11.84 V

5VSB(V)

4.94V

Voltage of Battery

3.02V

CPU Temperature

38oC

System Temperature

32oC

CPU Fan Speed

3688RPM

System Fan Speed

0 RPM

Smart Fan Control

[Disabled]

x Start PWM

Temperature

x Start PWM Value

x Slope PWM Value

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

Disabled

Summary of Contents for M7VMX series












































































































Search results

Summary of Contents for M7VMX series

Reviews:

Related manuals for M7VMX series

Brands by name

Popular brands

Foxconn M7VMX series, User Manual

Search results

Summary of Contents for M7VMX series

Reviews:

Related manuals for M7VMX series

Brands by name

Popular brands