Foxconn M7VMX series User Manual Download | Manualshive

Page: 36 / 107

background image

3

29

Advanced BIOS Features

► Removable Device Priority

This option is used to select the priority for removable device.

► Hard Disk Boot Priority

This option is used to select the priority for HDD startup. After pressing <Enter>, you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using <PageUp>/
<PageDown>; you can exit this menu by pressing <Esc>.

► CD-ROM Boot Priority

This option is used to select the priority for CD-ROM startup. After pressing <Enter>, you can
select the CD-ROM using the Up/Down arrow keys, and change the CD-ROM priority using
<PageUp>/<PageDown>; you can exit this menu by pressing <Esc>.

► First / Second / Third Boot Device

These three options allow you to select the priority of boot sequence from different devices.

► Boot Other Device

With this function set to enable, the system will boot from some other devices provided that the

first/second/third boot devices failed.

► Boot Up Floppy Seek

This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.

► Boot Up NumLock Status

This item defines if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

► Security Option

When it is set to “Setup”, a password is required to enter the CMOS Setup screen. When it
is set to “System”, a password is required not only to enter CMOS Setup, but also to start up
your PC.

► Full Screen Logo Show

This item allows you to enable or disable full screen customer's logo.

Phoenix - AwardBIOS CMOS Setup Utility

Advanced BIOS Features

► Removable Device Priority

[Press Enter]

Item Help

► Hard Disk Boot Priority

[Press Enter]

► CD-ROM Boot Priority

► CD-ROM Boot Priority

[Press Enter]

Menu Level ►

First Boot Device

[Hard Disk]

Second Boot Device

[CDROM]

Third Boot Device

[Removable]

Boot Other Device

[Enabled]

Boot Up Floppy Seek

[Disabled]

Boot Up NumLock Status

[on]

Security Option

[Setup]

Full Screen Logo Show

[Enabled]

↑↓→←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F7:Optimized Defaults

Press Enter

«
...
34
35
36
37
38
...
»

Summary of Contents for M7VMX series












































































































Reviews:

No comments

Related manuals for M7VMX series

Brand: Yamaha Pages: 96

Brand: FAAC Pages: 8

Brand: Texas Instruments Pages: 38

Brand: JETWAY Pages: 52

Brand: Texas Instruments Pages: 16

A20-OLINUXINO-LIME

Brand: OLIMEX Pages: 49

Brand: OLIMEX Pages: 13

MPG Z390 GAMING EDGE AC

Brand: MSI Pages: 87

K8T8AS - REV 3.0

Brand: JETWAY Pages: 26

Brand: Microsemi Pages: 22

Brand: MSI Pages: 90

Brand: Wolfson Pages: 12

MPG Z390 GAMING PLUS

Brand: MSI Pages: 76

Brand: DFI Pages: 92

Brand: ADLINK Technology Pages: 67

Brand: WinSystems Pages: 85

Brand: Dialog Pages: 12

Brand: ASROCK Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands