background image

5

93

9. Use [↓] key to select "NVIDIA nForce Storage Controller (required)", then press 

[Enter].

10. Two drivers are displayed. Press <Enter> to continue.

Windows Setup

 

  Setup will load support for the following mass storage device(s):

        NVIDIA RAID Driver (required)

        NVIDIA nForce Storage Controller (required)

      * To specify additional SCSI adapters, CD-ROM drivers, or special 

        disk controllers for use with Windows, including those for 

        which you have a device support disk from a mass storage device 

        manufacturer, press S.

      * If you do not have any device support disks from a mass storage

         device manufacturer, or do not want to specify additional

        mass storage devices for use with Windows, press ENTER.

  S=Specify Additional Device         ENTER=Continue        F3=Exit

Windows Setup

 

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

      

  ENTER=Select     F3=Exit

 

NVIDIA nForce Storage Controller (required)

NVIDIA RAID Driver (required)

NVIDIA nForce Storage Controller (required)

Summary of Contents for M7VMX series












































































































Reviews: