manualshive.com logo in svg

Foxconn M7VMX series, User Manual

The Foxconn M7VMX series is a cutting-edge motherboard offering exceptional performance and versatility. To guide you through its features and installation process easily, we provide a comprehensive User Manual available for free download at manualshive.com. Access the manual now and maximize your user experience with Foxconn M7VMX series.

Share
Download
background image

5

95

5-5 Setting Up a Non-Bootable RAID Array

This section assumes the following setup :

■  

Boot Disk with Windows XP installed :

One hard disk HDS728080PLAT20 (80GB) is connected to the IDE channel, and set 

to Master.

■  A Mirrored 

RAID Array Disk : 

Two SATA hard disks are configured as a mirrored RAID1 array, they are :
Hitachi HDT725025VLA, (232.88GB) connected to SATA port2 of the moherboard.
Segate ST3320620AS, (298.09GB) connected to SATA port4.

■  A 

SATA DVD Drive : 

A DVD drive connected to SATA port1.

1. Reboot your system, and go to "MCP SATA Mode" menu. 

Enable the RAID function together with the SATA ports which have the hard disks 
and DVD drive connected. Press [F10] to save the settings and reboot.

 

To achieve the best performance and reliability, we highly recommend you 

using the hard disks with the same brand, si�e and model number. Though 
we are using different brand of hard disks as an example here, the purpose 
is only for easy understanding.

WA

RN

IN

G

!

Phoenix - AwardBIOS CMOS Setup Utility

MCP SATA Mode

    SATA Operation Mode 

[

RAID

]

 

   

Item Help

     

SATA Pri-Master    RAID

 

[Enabled]

    

SATA Pri-Slave      RAID

 

[Enabled]

 

 

Menu Level  ►

    

SATA Sec-Master  RAID

 

[Enabled]

    

SATA Sec-Slave    RAID

 

[Enabled]

  ↑↓→←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

←:Move Enter:/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

:Move   Enter:Select    +/-/PU/PD:Value   F10:Save     ESC:Exit   F1:General Help         

                          F5:Previous Values                        F7:Optimized Defaults

RAID

Summary of Contents for M7VMX series












































































































Reviews:

No comments

Related manuals for M7VMX series

Giada NI-R3188 Quick Installation Manual preview
NI-R3188
Brand: Giada Pages: 2
JETWAY NF731V Series User Manual preview
NF731V Series
Brand: JETWAY Pages: 46
Texas Instruments TPS7A21EVM-059 User Manual preview
TPS7A21EVM-059
Brand: Texas Instruments Pages: 18
ON Semiconductor MT9J003I12STCVH-GEVB User Manual preview
MT9J003I12STCVH-GEVB
Brand: ON Semiconductor Pages: 5
STMicroelectronics STEVAL-IME008V1 Wiring Manual And Hardware Reference preview
STEVAL-IME008V1
Brand: STMicroelectronics Pages: 19
DFI CS551 User Manual preview
CS551
Brand: DFI Pages: 46
ASROCK Fatal1ty B150 Gaming K4 Manual preview
Fatal1ty B150 Gaming K4
Brand: ASROCK Pages: 154
Congatec Qseven conga-QA5 User Manual preview
Qseven conga-QA5
Brand: Congatec Pages: 61
TYAN S5535 Quick Reference Manual preview
S5535
Brand: TYAN Pages: 100
QDI Advance 5 Manual preview
Advance 5
Brand: QDI Pages: 19
ECS LIVA PC KIT User Manual preview
LIVA PC KIT
Brand: ECS Pages: 60
Pentium Explorer IV User Manual preview
Explorer IV
Brand: Pentium Pages: 48
Gigabyte GA-8IG1000MT User Manual preview
GA-8IG1000MT
Brand: Gigabyte Pages: 96
ON Semiconductor AR0140AT User Manual preview
AR0140AT
Brand: ON Semiconductor Pages: 5
MSI MS-7641 Manual preview
MS-7641
Brand: MSI Pages: 169
TYAN S2881 Manual preview
S2881
Brand: TYAN Pages: 64
Acer AcerPower 3000 User Manual preview
AcerPower 3000
Brand: Acer Pages: 27
Acer 370LXB User Manual preview
370LXB
Brand: Acer Pages: 20

Brands by name

Popular brands

Load more brands