29
3
Advanced bIoS features
► CPU Feature
Press <Enter> to go to its submenu.
► Removable Device Priority
This option is used to select the priority for removable device.
► Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing <Enter>, you can
select the HDD using the Up/Down arrow keys, and change the HDD priority using <PageUp>/
<PageDown>; you can exit this menu by pressing <Esc>.
► CPU L1 & L2 Cache
Enable/Disable CPU cache setting. L1, L2 cache are small, fast memory caches that are built
into a CPU and help speed access to important and frequently-used data. L1 cache is typically
smaller and faster than L2 cache. L1 cache is an abbreviation of Level 1 cache.
► Hyper-Threading Technology
This item is used to enable/disable the Hyper-Threading feature. It will be displayed only when
the CPU support this feature.
► First/Second/Third Boot Device
These three options allow you to select the priority of boot sequence from different devices.
► Boot Other Device
With this function set to enable, the system will boot from some other devices provided that the
first/second/third boot devices failed.
► Boot Up Floppy Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.
► Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► CPU Feature
[Press Enter]
Item Help
► Removable Device Priority
[Press Enter]
► Hard Disk Boot Priority
[Press Enter]
Menu Level ►
CPU L1 & L2 Cache
[Enabled]
Hyper-Threading Technology
[Enabled]
First Boot Device
[Hard Disk]
Second Boot Device
[CDROM]
Third Boot Device
[Removable]
Boot Other Device
[Enabled]
Boot Up Floppy Seek
[Disabled]
Boot Up NumLock Status
[on]
Security Option
[Setup]
x APIC Mode
[Enabled]
Delay For HDD
[ 2]
Full Screen Logo Show
[Enabled]
Small Logo(EPA) Show
[Disabled]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
Press Enter