32
3
Advanced Chipset features
► PCI Express Root Func
Press <Enter> to its submenu.
► System BIOS Cacheable
Select “Enabled” to allow caching of the system BIOS which may improve performance. If any
other program writes to this memory area, a system error may result.
► Memory Hole At 15M-16M
This option is used to determine whether the 15M-16M address field of memory is reserved for
the ISA expansion card.
** VGA Setting **
► PEG/Onchip VGA Control
This option is used to enable or disable PCI Express graphics card or onboard VGA.
► On-Chip Frame Buffer Size
Intel G31 chipset supports the selection of two different sizes of pre-allocated memory : 1MB
and 8MB. This pre-allocated memory selection is supplied for legacy VGA and SVGA graphics
support and compatibility. Upon boot, the System BIOS will pre-allocate the amount selected
(1MB or 8MB) from the top of the main system memory, which will be dedicated for VGA/
SVGA graphics. The VGA graphics memory is needed for applications run from a Microsoft
MS-DOS or legacy operating system, where there is no Intel Graphics Driver loaded.
► DVMT Mode
Dynamic Video Memory Technology (DVMT) dynamically allocates system memory for use
as video memory to ensure the most efficient use of available resources for maximum 2D/3D
graphics performance.
The amount of video memory allocated depends upon the amount requested by the operating
system. When the memory is no longer required, it is returned to the operating system for use
by other applications or system functions. DVMT allocates memory based on system needs.
This BIOS option allows you to adjust the amount of memory available for DVMT.
Fixed is a memory allocation method addition to the Unified Memory Architecture (UMA)
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
► PCI Express Root Port Func
[Press Enter]
Item Help
System BIOS Cacheable
[En
abled]
Memory Hole At 15M-16M
[D
isabled]
Menu Level ►
** VGA Setting **
PEG/Onchip VGA Control
[
Auto]
On-Chip Frame Buffer Size
[ 8MB]
DVMT Mode
[DVMT]
DVMT/FIXED Memory Size
[128MB]
Init Display First
[PCI Slot]
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7: Optimized Defaults
Press Enter
