manualshive.com logo in svg

Foxconn Cinema Deluxe, User Manual, Page: 54 / 114

Share
Download
Foxconn Cinema Deluxe User Manual Download Page 54

3

47

bIoS Security features

► Change Supervisor Password

This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to 
input user password optionally.

► Change User Password

This item is used to install or change user password.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

BIOS Security Features

   

Supervisor Password 

   : Not Installed

 

   

 

      Help Item

   

User Password                  : Not Installed

   

 

 

 

                                                     

Install or change the

   Change Supervisor Password   

[Press Enter]

 

    password.

   Change User Password   

 

[Press Enter]

 

 

 

   

 

 

 

    ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     F1:General Help         

                               F2/F3:Change Colors 

F9:Optimized Defaults

[Press Enter]

   Enter New Password :  

Summary of Contents for Cinema Deluxe



















































































































Reviews:

No comments