Foxconn Cinema Deluxe User Manual Download Page 37 | Manualshive

Page: 37 / 114

background image

3

30

Integrated Peripherals

► SATA Configuration / USB Configuration

Press <Enter> to go to relative submenu.

► LAN Controller

This item is used to enable or disable the LAN controller.

► LAN Boot ROM

This item is used to enable or disable the LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.

► 1394 FireWire

This item is used to enable or disable the onboard 1394 controller.

► USB Controller

This item is used to enable or disable the USB controller.

► Azalia HD Audio Controller

This item is used to enable or disable the Azalia HD Audio Controller.

► Serial Port Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.

► IR Port Address

This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.

► IR Port Mode

This item is used to set the IR mode. The available settings are :

[IrDA] : An IrDA device for maximum 115200 bit/s.
[ASK IR] : A faster IrDA for 1152000 bit/s.

► IR Port Duplex Mode

This item enables you to determine the infrared function of the onboard infrared chip.

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

Integrated Peripherals

► SATA Configuration

[Press Enter]

Help Item

► USB Configuration

[Press Enter]

LAN Controller [Enabled]

Configure the SATA

LAN Boot ROM

[Disabled] device(s).

1394 FireWire

[Enabled]

USB Controller [Enabled]

Azalia HD Audio Controller

[Enabled]

Serial Port Address [3F8/IRQ4]

Ir Port Address [2F8/IRQ3]

Ir Port Mode [IrDA]

Ir Port Duplex Mode [Half Duplex]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F2/F3:Change Colors

F9:Optimized Defaults

[Press Enter]

«
...
35
36
37
38
39
...
»

Summary of Contents for Cinema Deluxe



















































































































Reviews:

No comments

Related manuals for Cinema Deluxe

Brand: Yanmar Pages: 44

Brand: MATSONIC Pages: 76

Brand: Gigabyte Pages: 104

Brand: JETWAY Pages: 48

Brand: Biostar Pages: 72

Brand: Gigabyte Pages: 44

Brand: EVGA Pages: 2

Brand: IEI Technology Pages: 156

Brand: Parker Pages: 56

Brand: Magic-Pro Computer Pages: 40

Brand: Humandata Pages: 8

Brand: Avalue Technology Pages: 79

Brand: Microchip Technology Pages: 30

Brand: OLIMEX Pages: 14

Brand: Norco Pages: 60

Brand: Texas Instruments Pages: 18

Digital Alpha VME 4/224

Brand: DEC Pages: 442

Brand: Global Pages: 37

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands