Foxconn A76ML Series User Manual Download Page 43

Page: 43 / 105

DOS mode. The available settings are: [High Speed] in 480Mbps; [Full Speed] in 12Mbps.

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.

If USB devices are connected to the computer, the following item will appear:

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There

are many different emulation types of this USB device, such as floppy, hard disk and CDROM

can be selected.

SuperIO Configuration

SuperIO Configuration

Help Item

OnBoard Floppy Controller

[Enabled]

Allows BIOS to enable

Serial Port1 Address

[3F8/IRQ4]

or disable floppy

IR Address

[2F8/IRQ3]

controller.

IR Mode

[IrDA]

IR Duplex Mode

[Half Duplex]

Parallel Port Address

[378]

Parallel Port Mode

[Normal]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit

F1:General Help F9:Optimized Defaults

[Enabled]

► OnBoard Floppy Controller

This item is used to enable/disable Floppy Controller.

► Serial Port1 Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.

► IR Address

This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.

► IR Mode

This item is used to set the IR mode. The available settings are :
[IrDA] : An IrDA device for maximum 115200 bit/s.
[ASK IR] : A faster IrDA for 1152000 bit/s.

► IR Duplex Mode

This item enables you to determine the infrared function of the onboard infrared chip.

► Parallel Port Address

This item is used to assign the I/O address for the onboard parallel port .

► Parallel Port Mode

Summary of Contents for A76ML Series










































































































Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands

Foxconn A76ML Series, User Manual

Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands