Foxconn A76ML Series User Manual Download Page 81

Page: 81 / 105

1. Find a PC, put a diskette into its floppy

drive A:, this diskette will be formatted
later. Put the driver CD into DVD-ROM
drive.

2. Depending on which platform your
  system is, normally, it is a 32-bit XP
  system. Use Windows explorer, and
  go to

CD:\Driver\AMD\RAID\Floppy\

WinXP\

, click on RaidTool icon to start

the creation.

3. Click on “GO” to Start.

4. Select the desired destination FDD drive.

It can be the default drive A: or any USB
FDD. Click “OK” to continue.

5. Insert a diskette, click “OK” to continue.

6. You can input a volume label for this dis-

kette, click on “Start” to format.

5-1 Create a RAID Driver Diskette

If you want to install a brand new Windows XP on a RAID system, you need to create a

RAID driver floppy diskette which will be used during Windows XP installation later.

Summary of Contents for A76ML Series










































































































Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands

Foxconn A76ML Series, User Manual

Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands