Foxconn A76ML Series User Manual Download Page 29

Page: 29 / 105

halt condition can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

► Mouse

The system boot will not stop for a mouse error if you enabled this item.

► Floppy

The system boot will not stop for a floppy error if you enabled this item.

► Model Name

Model name of this product.

► BIOS Version

It displays the current BIOS version. User can check this information and discuss with the field

service people if a BIOS upgrade is needed.

► Memory

This item displays the current memory size. The size is depending on how many memory mod-
ules were installed in your system before powering on.

► MAC Address

This item shows the onboard LAN MAC address.

► CPU Name

It displays the current CPU name.

Summary of Contents for A76ML Series










































































































Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands

Foxconn A76ML Series, User Manual

Search results

Summary of Contents for A76ML Series

Reviews:

Related manuals for A76ML Series

Brands by name

Popular brands