Foxconn 975X7AB Manual Download

Page: 22 / 78

Chapter 2 Installation Instructions

Memory

This motherboard includes four 240-pin slots with 1.8V for DDR2. These slots
support dual channel DDR2 memory technology up to 10.7GB/s. You must install
at least one memory bank to ensure normal operation.

Recommended Memory Configurations

The following table list is the recommended memory configurations. Please
install the memory according to the list.

Installation of DDR2 Memory

1. There is only one gap near the center of the DIMM slot, and the memory

module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.

2. Align the memory module to the DIMM slot, and insert the module vertically

into the DIMM slot.

3. The plastic clips at both sides of the DIMM slot will lock automatically.

128 Pins

112 Pins

Mode

DIMM1

DIMM2

DIMM3

DIMM4

Populated

Dual Channel

Single Channel

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for 975X7AB















































































Search results

Summary of Contents for 975X7AB

Reviews:

Related manuals for 975X7AB

Brands by name

Popular brands

Foxconn 975X7AB, Manual

Search results

Summary of Contents for 975X7AB

Reviews:

Related manuals for 975X7AB

Brands by name

Popular brands