Foxconn 975X7AB Manual Download

Page: 35 / 78

Chapter 3 BIOS Description

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.

CHS

For HDD<528MB

LBA

For HDD>528MB & supporting LBA (Logical Block Addressing)

Large

For HDD>528MB but not supporting LBA

Auto

Recommended mode

Floppy Drive A

This option allows you to select the kind of FDD to be installed, including

“

None

”

[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].

Halt On

This category determines whether or not the computer will stop if an error is
detected during powering up.

All Errors

Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.

No Errors

The system boot will not stop for any errors that may
be detected.

All, But Keyboard

The system boot will not stop for a keyboard error; but
it will stop for all other errors.

All, But Diskette

The system boot will not stop for a diskette error; but
it will stop for all other errors.

All, But Disk/Key

The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.

Memory

This is a Display-Only Category, determined by POST (Power On Self Test) of
the BIOS.

Base Memory

The BIOS POST will determine the amount of base (or
conventional) memory installed in the system.

Extended Memory The BIOS determines how much extended memory

is present during the POST.

Total Memory

Total memory of the system.

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

Summary of Contents for 975X7AB















































































Search results

Summary of Contents for 975X7AB

Reviews:

Related manuals for 975X7AB

Brands by name

Popular brands

Foxconn 975X7AB, Manual

Search results

Summary of Contents for 975X7AB

Reviews:

Related manuals for 975X7AB

Brands by name

Popular brands