17
ASSEMBLING THE BASE
CAUTION :
Before any adjustment, repair or maintenance work, and before changing the blade, switch off the machine
and disconnect it from the power supply by removing the plug from the socket.
1.
Remove the table saw from the package, turn it upside down and place it on the ground, as shown in Fig. 17,
while protecting it so as not to damage it.
2.
Assemble the four feet (Fig. 17, 40) by fixing them to the frame with two hexagonal screws for each foot. You
must screw them in the frame, without fully tightening them.
3.
Assemble the four central bars (Fig. 17, 42) with the step bolts and nuts provided, without fully tightening them.
4.
Insert the rubber feet (Fig. 17, 43).
5.
Turn the table saw and place the base on the ground.
6.
Firmly tighten all the screws and nuts as shown in Fig. 18.
ASSEMBLING THE WORKBENCH SIDE EXTENSIONS
1.
Assemble the two extensions (Fig. 1, 27) to the bench (Fig. 1, 1) and fix them with screws and bolts without
tightening them.
2.
Assemble the bars (Fig. 1, 28) to the frame of the table saw and on the side extension, and fix them with screws
and bolts without tightening them.
3.
Adjust the height of the extension, in order that they are perfectly aligned with the workbench.
4.
Tighten all the screws firmly as shown in Fig. 20.
Summary of Contents for F36-522C
