Fox F36-522C, Assembly And Operating Instructions Manual

Page: 11 / 30

11
RECOMMENDED USE
This machine has been manufactured for longitudinal and cross cutting of wood and similar materials. The blade can
be tilted from 0° to 45° and at 0° it can cut up to 73mm, while if the blade is tilted it can cut up to a width of 60mm.
Do not cut wood wider than 73mm.
Do not cut metal, stone, rubber, plastics, chalk, glass wool, etc.
Do not cut stubs or irregular wood pieces.
Do not use this machine for ribbing or moulding.
Only use recommended saw blades.
Do not use it as a portable tool.
Do not modify the machine, the safety and protection devices or the switches.
Never use the machine without protection or safety devices.
Do not use this machine to make blind grooves.
UNPACKING
This package includes :
1.
Table saw
2. Mitre gauge
3. Rip fence
4. Pusher
5. Three workbench extensions
6. Four attach bars for workbench extensions
7. Screws for fixing workbench extensions : eight screws and four nuts
8. Suction pipe
9. Two wrenches to change the blade
10. Blade protection
11. Base including :

Four feet

Four crossbars

Four rubber feet

20 step bolts, 20 nuts

Two back supports
Remove the table saw and all parts from the package, check if there are any missing or damaged parts.
If you find any faulty or damaged parts, do not use them as this may endanger the efficiency and safety of the
machine. To change faulty parts, consult an after sales centre.