5
SAFETY RULES
ATTENTION :
While following the instructions in this manual, when you use a power tool, you must still follow all precautions to
prevent the risk of fire, electric shock and injury.
Read this instruction manual before putting the machine into operation and keep it carefully.
Working with power tools can be dangerous if you do not follow proper safety measures. As with any electrical
machine with moving parts, the use of certain hazards involved. If you use the machine as shown in the manual that
you pay attention to the work you are doing, you observe the regulations and use appropriate personal protective
equipment, the potential for injury will be significantly reduced. The remaining potential risks are related to:
1 - electric shock due to direct or indirect contact with electrical parts.
2 - injury from contact with moving parts.
3 - injury from contact with angular or sharp parts, or changing the blade.
4 - injuries due to the ejection of tool parts or the material you are working.
5 - injuries due to noise.
6 - injury due to dust.
7 - injuries due to incorrect installation of the machine.
Safety equipment such as guards, push sticks, restraints, featherboards, safety goggles, dust masks, hearing
protection, safety shoes and gloves can reduce the possibility of injury. But even the best guard will not against a
lack of common sense, care or attention. Always use common sense and take precautions in the workshop. If a
procedure feels dangerous, do not try it. Work out a safer method.
REMEMBER
: safety is everyone's responsibility.
This tool was designed for specific uses. FOX strongly recommended not to change it and / or used for any
application other than that for which it was designed. If questions arise about a particular application, DO NOT use
the tool until you have contacted FOX to determine if the tool can be used in this way.
READ AND KEEP THIS MANUAL.
