27
TROUBLESHOOTING
DANGER :
After detecting a malfunction, and before using again:
- Turn the machine off.
- Unplug the power cord.
- Wait until the machine stops and the belt is completely stopped.
- After servicing, reinstall carefully and check the machine again.
The motor doesn’t work
A decrease in power has triggered the safety switch.
- Restart the machine.
No power:
- Check the power cord, plug and switch.
The sander is not working properly or stops
The user is using too much pressure on the belt:
- Lighten the pressure exerted on the piece being sanded.
- Check the condition of the belt or disc.
ASSISTANCE
All tools and accessories are built and tested using modern and safe manufacturing techniques. But if a tool fails in
spite of this, repairs must be performed by an authorised service centre.
You can contact the FOX service centre on 01592 656188.
