44
REPLACEMENT OF FLYWHEELS’ COATINGS
Regularly check the flywheels’ coatings and if necessary change both of them:
1.
remove the saw blade (see previous paragraphs);
2.
make a small screwdriver slide under the coatings and remove them;
3.
place the new plastic coatings and re-assemble the saw blade.
REPLACEMENT OF THE BENCH INLAY
The bench inlay must be changed when the hole for the passage of the blade is damaged.
1.
remove the bench inlay from the workbench by pushing from below;
2.
insert a new bench inlay.
DANGER!
Before performing any tasks after a failure:
- Switch off the machine.
- Remove the plug from the socket.
- Wait for the saw blade to stop.
After any intervention, replace all safety devices and check them.
The engine does not work
A possible tension reduction has made the minimum voltage relay start.
- Re-start the machine.
There is not any supply voltage:
- Check the cable, the socket and the switch.
Saw blade moves away the cutting line or decentralizes itself
The saw blade is not centred on the driving wheel:
Modify the upper flywheel inclination (see par. “Functioning”).
MALFUNCTIONS
Summary of Contents for F28-186
