fig. 4
6
Follow the steps below to select the sensor using
MicroLab 2.0:
Selecting the MicroLog External Sensor
1. Open the MicroLog software.
2. Connect MicroLog to the PC using the serial communication
cable.
3. Click on STOP in the left-hand toolbar.
4. Activate the MicroLog external sensor by clicking on the
Sensor Selection button next to the external sensor on the
right-hand toolbar (fig. 4).
5. Program MicroLog by clicking on the yellow SEND arrow at
the bottom of the right-hand toolbar. You will know
MicroLog has been programmed when the yellow arrow
becomes transparent.
Summary of Contents for MicroLog DT141
Page 4: ...4 fig 2...
