5
Selecting the External Contact Sensor
Select an external contact sensor from the drop down menu.
The contact sensor will show only two values, “Open” and
“Close”. You may select your own values by replacing the default
”open” / “close” from the DEFINE NEW SENSOR menu. In the
DEFINE NEW SENSOR dialog box, select ADD, and select CONTACT.
Then fill in the sensor name, and two sensor values representing
the sensor position when the sensor is measuring “open” or
“close”, and press OK (fig. 3).
fig. 3
Summary of Contents for MicroLog DT141
Page 4: ...4 fig 2...
