68
Chapter 3 Working with MultiLab
You can define the properties of each sensor individually in the first step of the Setup
wizard
,
or by selecting
Sensor properties
from the
Logger
menu.
1. Click
Setup wizard
on the main toolbar to open the Setup
wizard
2. Click
Properties
next to the input you want to set
3. Click the check boxes next to the desired measurements
4. To change more properties, click the tab at the top of the dialog box
5. Click
OK
3. Presetting the display
You may want to define the graph
’
s settings, such as formatting and scaling the
graph and selecting the axes, and to define the meters
’
settings prior to beginning a
recording session. You can define the settings of each sensor input individually in the
first step of the
Setup wizard
:
1. Click
Setup Wizard
on the main toolbar to open the setup
wizard
2. Click
Properties
next to the input you want to set
3. Click the
Display properties
tab
4. Select a measurement from the
Select measurement
drop list
5. Select the graph or graphs in which you would like to display the
data, from the
Display on graph
drop list
6. Select a meter in the
Meter type
drop list if you want to display the
data in a meter as well as on the graph
7. Format the line and markers in the
Plot
section
8. If you want a specific scale, uncheck the
Auto scale
check box and
enter the desired minimum and maximum values of the axis
9. Click
OK
4.Preset the graph’s X-axis
1. Click
X-Axis display properties
in the first step of the Setup wizard
to open the dialog box:
