8
-
TO FIX THE CABLES IN THEIR TERMINALS USE A TOOL OF THE PROPER SIZE TO AVOID
THE DAMAGING OF THE SCREWS OR OF THEIR SEAT. If use an electric screwier pay
attention not to spoil the thread or the screws.
-
FIX THE CONTROL PANEL TO A WALL AS IN PICTURE N.1 WITH SCREWS AND SCREW
ANCHOR USING THE HOLES ARRANGED IN THE BOX OR THE FIXING BRACKET IF
PRESENT.
AFTER THE FIXING, REMOVE EVERY PLASTIC OR METALLIC SURPLUS (ex. Pieces of copper of
the cables or plastic shavings of the box) INSIDE THE BOX BEFORE SUPPLING POWER.
WALL
Fig.1
N.B. : DO NOT INSTALL THE CONTROL PANEL CLOSE TO OBJECTS IN CONTACT WITH
FLAMMABLE LIQUIDS, WATER OR GAS.
6b. INSTALLATION
