Four winns V458, Owner'S Manual

Page: 153 / 189

Owner’s Manual Page 151 Woodwork and Composites - Section Q
Figure Q10: Companionway Door
To clean acrylic plastic:
1) Rinse with plenty of water to wash off as much
dirt as possible.
2) Using your bare hand, along with plenty of water,
feel and remove any dried on dirt or mud. Do not
use fingernails to scrape as this could scratch the
plexiglass.
3) Wash using a soft, grit free cloth or sponge
and mild, nonabrasive soap or detergent.
4) Blot dry using a clean, damp chamois.
NOTICE
Never use a dry cloth, duster, glass cleaning
solutions or citrus cleaner on acrylic plastic.
NOTICE
Do not use solvents such as acetone, silicone
spray, benzine, carbon tetrachloride, fire
extinguisher fluid, dry cleaning fluid, lacquer
thinner or ammonia. These solutions attack the
acrylic surface.
You can use fine automotive acrylic rubbing and
polishing compounds to remove fine scratches on
acrylic.
Figure Q9: Forward Head
NOTICE
DO NOT use abrasive cleaners or sol vents on
countertop. DO NOT use Soft Scrub™ soap or
similar cleaning prod ucts; they will scratch the
surface and remove the shine.
NOTICE
DO NOT set hot pans or dishes directly on the
countertop. The countertop may become burnt
and/or discolored. Use of a hot pad will prevent
any discoloration from occurring.
NOTICE
DO NOT use countertop as a cutting board.
The knife will leave gouges/marks in the
surface of the countertop. A cutting board that
fits over the sink is provided.
Q - 7 Acrylic Plastic - (Plexiglass)
Acrylic plastic is utilized in the companionway doors,
transom doors, deck hatches, portlight windows,
skylights, sliding storage doors, electrical panel doors,
cabinets and cabin windows. See Figure Q10.