Four winns V458 Page 133 Owner'S Manual Download

Page: 133 / 189

Owner’s Manual Page 131

Upholstery - Section N

flexibility, increased visibility, and riding comfort. See

Figures N15 & N16.

Figure N15: Helm Seat w/Bolsters

Figure N16: Helm Seat w/Bolsters in Raised Position

DO NOT sit on the backrest portion of any

cockpit seat. The operator could lose control

of the boat or passengers could be thrown

from the boat. The seat could also be dam-

aged if exces sive force is applied.

The driver's side armrest is padded for comfort.

The armrest is also hinged which allows the armrest

portion to be raised to reveal convenient storage

below. See Figure M17.

Figure N17: Helm Seat Under Armrest Storage

B. Stern Seat

The custom L-shape stern seat includes a fiber glass

base. The L-shape seating arrangement continues

around the back of the boat to create more usable

seating area. Under seat storage is readily available

under the hinged stern seat cushions. Refer to Figures

N18 and N19.

Figure N18: L-Shape Stern Seating

Figure N19: Under Stern Seat Storages

C. Cockpit Table

An aft cockpit table is standard. The table is typically

made of teak.

Note

: Other wood or material may be

substituted without notice. See Figure N20. The table

base is “flush” mount ed for convenience and safety.

Seat Adjustment

Control Lever

Summary of Contents for V458






























































































































































































Search results

Summary of Contents for V458

Reviews:

Related manuals for V458

Brands by name

Popular brands

Four winns V458, Owner'S Manual

Search results

Summary of Contents for V458

Reviews:

Related manuals for V458

Brands by name

Popular brands