Four winns V458 Owner'S Manual Download

Page: 89 / 189

Owner’s Manual Page 87

Fuel Systems - Section I

I - 1

DIESEL FUEL SYSTEMS

The diesel fuel system used in the V458 is designed to

meet or exceed the requirements the National Marine

Manufacturers Association and the American Boat and

Yacht Council in effect at the time of manu fac ture.

NOTICE

Use only clean, dry fuel of the type and grade

recom mend ed by the engine manu factur er.

The use of incorrect or contaminated fuel can

cause engine malfunction and serious

damage. Engine damage resulting from the

use of incorrect fuel is consid ered misuse of

the engine and will void the engine warranty.

Refer to the section on Fuel Requirements in

the engine manual for information on fuel

specifi cations.

In twin engine applications, the port and starboard fuel

tanks are locat ed for ward and outboard in relationship

to their respective engine. See Figure I1. The capacity

of the fuel tank(s) may be found on our website at

www.fourwinns.com.

The V458 models are equipped with twin fuel tanks

and come with a manual fuel valve system.

See Figure I1. This fuel valve system allows you

to manually select which fuel tank you want your

engines to draw fuel from. The diesel generator uses

a separate fuel pick-up (not shown). Please see

Figures I9 and I10 at the end of this section for fuel

valve components listing and operations.

A. System Testing

All fuel systems have been factory in spected and

pressure tested in accordance with regulations

in effect at the time of manufacture. Additionally,

each fuel tank must pass rigid tests and inspections

performed by the fuel tank manu facturer.

Prior to taking delivery, it is important that a full

inspection be made of the entire fuel system by

the selling dealer. An entry on the Four Winns

Pre- Delivery Inspection Form portion of the Warranty

Registration Card will attest to the deal er’s perfor-

mance of this service.

Fuel Systems

Starboard

Fuel Tank

Port

Fuel Tank

Figure I1: Twin Fuel Tank Locations

Fuel Valve System

Port

Engine

Starboard

Engine

Summary of Contents for V458






























































































































































































Search results

Summary of Contents for V458

Reviews:

Related manuals for V458

Brands by name

Popular brands

Four winns V458, Owner'S Manual

Search results

Summary of Contents for V458

Reviews:

Related manuals for V458

Brands by name

Popular brands