PRESIDIO
Elevate the antenna and remove the set screw from the rotating gear housing
(see illustration). Spray lubricant into hole and around the edges of the gear housing. Rotate
the gear housing until the lubricant coats the bearing surfaces and the antenna rotates freely.
Make sure to check the operation of all exterior lights often. Check identification, clearance, turn
signal, brake, and backup lights to make sure they are working correctly. Replace burnt out
bulbs as soon as possible.
Clean with hot soapy water or a good liquid cleaner. Avoid using abrasive cleaners. Never use
steel wool on stainless steel, since the steel particles left in the sink can rust and become
unsightly. When cleaning stainless steel with a mild cleanser, rub gently with the grain, and rinse
well. Rinse after each use and wipe dry.
Be sure to remove all food and ice from the refrigerator at the end of each trip. Prop the door
open slightly to keep the interior dry, and free of mold, mildew, and odors.
Make sure to read all literature provided with each of the appliances, and follow the
maintenance instructions included. Pay particular attention to any cautions or warnings
included. Also read the rest of this manual, following the instructions for the care and use of
appliances.
NOTE:
Do not place hot pans directly on countertop surfaces. Extreme heat can cause
scorching, and may also deteriorate the bonding agents which secure the countertop to the
base cabinets.
12-5
CARE & MAINTENANCE
APPLIANCES, SINKS & COUNTERTOPS
EXTERIOR LIGHTS
Summary of Contents for 2007 Presidio
