Four-Faith F3 36 Series User Manual Download Page 8

Page: 8 / 83

F3X36 Series Router

User Manual

Xiamen Four-Faith Communication Technology Co.,Ltd.

Page 8 of 83

Add

：

J1-J3,3

Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China

http

：

//www.fourfaith.com Tel

：

+86 592-6300326 6300325 6300324 Fax

：

+86 592-5912735

Standard and Convenience



Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect

to serial, Ethernet and WIFI devices directly



Support standard WAN port and PPPOE protocol that can connect to ADSL directly



Support intellectual mode, enter into communication state automatically when

powered



Provide management software for remote management



Support several work modes



Convenient configuration and maintenance interface

（

WEB or CLI

）

High-performance



Support multiple WAN access methods, including static ip, DHCP, L2TP,

PPTP,PPPOE,3G/HSPA/4G.



Support double link backup between cellular and WAN(PPPOE, ADSL) (optional)



Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)



Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN

version)



Support local and remote firmware upgrade,import and export configure file.



Support NTP, RTC embedded.



Support mulitiple DDNS provider service.



Support VLANs, MAC Address clone, PPPoE Server



WIFI

support

802.11b/g/n.

support AP, client, Adhoc, Repeater, Repeater Bridge and

WDS(optional) mode.



WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC

address filter.



Support multi online trigger ways, including SMS, ring and data. Support link

disconnection when timeout



Support

APN/VPDN



Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS,

ttraff,statistics, real time link speed statistics etc.



Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP,

POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc.



Schedule Reboot, Schedule Online and Offline,etc.

Summary of Contents for F3 36 Series




















































































Search results

Summary of Contents for F3 36 Series

Reviews:

Brands by name

Popular brands

Four-Faith F3 36 Series, User Manual

Search results

Summary of Contents for F3 36 Series

Reviews:

Brands by name

Popular brands