F3X36 Series Router
User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 44 of 83
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
7. Once you have a good signal (-70dBm to -30dBm, -70dBm being lowest), you can
change the Internet Connection Type on the Basic Setup page of the second router to
Disabled and set the
Gateway
to the LAN IP Address of the first router. You can now run
normal tests to check if you are connected (like ping).
Lzay WDS:
Default is disabled
.
Note
：
WDS is only available in AP mode. Also Wireless encryption WPA2 and Wireless
network mode B-Only are not supported under WDS.
3.3.3 Services
3.3.3.1
Services
DHCP Server
DHCPd assigns IP addresses to users local devices. While the main configuration is on
the setup page users can program some nifty special functions here.
Use NVRAM for client lease DB:
users
can store data to the
system NVRAM area is enabled
Used domain:
users can select here which domain the DHCP clients should get as their
local domain. This can be the WAN domain set on the Setup screen or the LAN domain
which can be set here.
LAN Domain:
users can define here their local LAN domain which is used as local
domain for DNSmasq and DHCP service if chose above.
Static Leases:
if users want to assign certain hosts a specific address then they can
define them here. This is also the way to add hosts with a fixed address to the router's
