fountain mercury Express Cruiser 2005, Operation, Maintenance & Warranty Manual

Page: 78 / 92

74
Troubleshooting
Electrical:
12Volt DC equipment and accessories:
Many problems can be solved or traced to blown fuses or popped
breakers. Also check for loose or corroded wires at battery and
ground blocks. In the case of cruisers, many times it is a matter of
not having the correct breaker switch turned on. All cabin electrical
items are controlled through the AC/DC panel. If an electrical com-
ponent is not operating, check to insure that the breaker switch is
turn on for that particular accessory.
Corrosion found in bulb sockets or wires and terminals can be
removed by cleaning with a brush. Reassemble and spray with a
corrosion inhibitor.
Replace any blown fuses or bad bulbs. If
fuses or breakers keep blowing or popping,
a wiring or component problem is likely
present and will need to be repaired.
110 Volt AC equipment should only be repaired by a trained electri-
cian. Unless you are trained in household electrical systems and
components this is best left to a professional. Make sure that your
AC panel breakers and transfer switches are in the correct position
for the desired operation.
Note: AC power is not available on some models.
Fluid Leaks:
Most of these leaks can be repaired with common tools. Hose