fountain mercury Express Cruiser 2005, Operation, Maintenance & Warranty Manual

Page: 48 / 92

Make sure safety switch is armed
(Gasoline Engines Only). This switch
should have the lanyard on the toggle
and be attached to the driver for safety.
Note: The engines will not run unless
this switch is in the run position.
Trim drive(s) to the in position before
starting the engine(s).
Locate the ignition key switches at the lower dash-
board. Insert keys into switches. Turn each to the
on position only (one click to the right-clockwise).
Indicator lights and audible alarms will sound for a
moment to indicate that systems are operational.
Note: Fire system light will stay on until key switch is
turned off. With the keys in this position (engines
cold) the only gauges that should indicate are the
fuel and volt gauges.
Turn key(s) to the full right start position until the engine starts, and
then release the key. It will spring back to the on-run position.
Note:
Do not turn key to the start position with the engine running or
starter and/or engine damage may occur.
(Note: On diesel packages, push the key “IN” and turn left-counter
clockwise to shut off the engines.)
Confirm water flow through the engine by way of the water pressure
gauges, and flow of water from the exhaust tips located under the
swim platform.
Let the engine(s) warm up sufficiently before getting under way.
44
Starting, Driving Gauges, Controls