1
A.D.A. Compliance:
4.4.1 Maximum Protruding Objects
4.2.5 Forward Reach
4.2.6 Parallel Approach
4.27.4 Operation
Compliant when properly installed.
ADULT INSTALLATION REQUIRED.
TOOLS REQUIRED:
Level (A)
Measuring tape (B)
Power drill with 7/32”, 1/8” and 1/2” masonry bits (C)
Power screwdriver with bull nose phillips bit (D)
•
READ ALL INSTRUCTIONS BEFORE ASSEMBLY OF Diaper Changing Station.
•
Unpack carton and identify all parts.
ASSEMBLY INSTRUCTIONS
Parts Description
Quantity
Hardware for installation:
3” Wood Screws
4
3/4” Finishing Washers
4
3” Machine Screws
2
3/4” Flat Washers
4
Toggle Anchors
2
1-1/4” Caps
6
Door / Wall Plate
1
3” Wood Screws
PARTS LIST
3/4” Finishing Washers
3” Machine Screws
3/4” Flat Washers
Toggle Anchors
1-1/4” Caps
15-3/8”
(390 mm)
17-1/2”
(445 mm)
34-1/4”
(870 mm)
For Wood Studs:
3/4” Flat Washers
For Use With Toggle Anchors:
Door / wall plate to be
mounted on outside of
restroom door.
IMPORTANT NOTE:
The EZ Mount
™
Backer Plate may or may not be included with the model you purchased. The backer
plate is intended to reduce installation time and costs as well ensure connection to two studs. Safe
installation can also be achieved without the use of the backer late by following the instructions
provided.
If your model did not include an EZ Mount
™
Backer Plate and you have determined that you would
like to purchase one, please contact us at 1-877-716-2757 if you have any questions. The part
number is A100-BPEH.
A
B
D
C
