8
7
RANGE HOOD
Upper Seal Mat
User Manual
1
6
7
1
1
Exhaust Cover
1
1
8
1
1
Cross Recess Head
Self-tapping Screw ST
3.9x9.5
Ring suction plate
assembly
Decorative Cover
Safety Block
Decorative Cover
Pothook
Expansion
Pipe
φ
10X53
Cross recess pan head
self-tapping locking
screws M4 X 18
■
Installation Position
Installation Suggestions
The range hood is only for family use only; Please do not use the range hood under
other conditions.
The range hood should be installed above the stove. Keep parallel between the
blower outer cover bottom end and cabinet bottom end.
The temperature of the range hood should not be more than 40
℃
.
The wall should be none-flammable. Never install the range hood on the flammable
wooden wall.
Attentions
Strictly Execute
Accessible parts may become hot when used with cooking appliances.
The air must not be discharged into a flue that is used for exhausting fumes from
appliances burning gas or other fuels
Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards
This appliance is not intended for using by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Strictly Execute
Strictly Execute
Strictly Execute
Strictly Execute
Strictly Execute
Strictly Execute
The range hood is heavy and the
installation is complex, so the
installation should be done by
professional people according to
the user manual.
Please wear protective golves to
avoid your hands being hurt by
rang hood sharp edge.
Please do not damage the electric
wire and other hidden equipment
when drilling on wall. Power off the
range hood when installing.
Please use specialized power socket
and it should be connected with
reliable ground wire to ensure safety.
Strictly Execute
Please use accessories provided by
FOTILE company to ensure safe and
well installation. Make sure the
tightness between expansion pipe
and wall hole, and please don’t drill
the hole too big, to avoid drop due to
expansion pipe loosening.
The wall should be strong enough to
support the range hood, otherwise
the range hood may drop down and
result in damage.
Make sure the exhausting pipe can
reach outdoors to avoid the fire and
keep the fresh air in the room.
Please don’t make the waste gas
stay indoor, loft, garage, etc. (This is
only for ducted range hood)The
waste air from the range hood
couldn’t share the same flue with
other imflamble gas.
Strictly Execute
If it is necessary to move the gas
stove before installing the range
hood, please close general gas
valve before moving the gas stove.
Installation Methods
Attentions
Forbidden
Strictly Execute
Strictly Execute
Attention
Suggest install the range hood after
finishing the kitchen decoration
Make sure to keep the appliance
horizontal.
After finishing installation, make sure
the range hood can normally work,
please read carefully and keep well
the user manual.
Please abandon and recycle the
old range hood which can’t work any
more, to protect the environment.
User Manual CHS9006.S
CHS9006.W
RANGE HOOD
Please read carefully about the user manual before using the product.
And keep it well after reading, for future reference.
Strictly Execute
Package of new range hood:To keep a well environment, please deal with the plastic
package by environmental way.Packing material is not toy, so please keep the
plastic bags and box away from the infant to prevent such dangers as suffocation, etc.
