6
5
RANGE HOOD
Cleaning and Maintenance
1.Cut off the power
before cleaning.
7.Firstly, hold the front end of
ring suction plate with both
hands, turn downwards, so that
the fastener of ring suction plate
is out of place, meanwhile turn
2.All electric parts
，
include motor, switch,
etc. should be away
from water.
8.Remove the motor
cover and decorative
cover.
Normal Malfunction and Trouble Shooting
Malfunctions
Possible reasons
How to check
Range hood can’t work, light can’t light
Check whether the plug is well inserted
or not
Check whether there is electricity or not
in the plug
Motor can work, but light can’t light
LED light is damaged
Haven't connected with
power supply
Replace LED light (done by professional
people)
a. Pour out the gathering oil periodically according to the oil cup indication; please
wipe the range hood surface once after every using the range hood; clean the air
inlet outer cover and inner cover every three days; clean the impeller once every
year (clean by professional people).
b. Please frequently clean the range hood surface, rectification plate and oil cup.
Wet cloth
Neutral cleanser
6.The two ends of the
oil cup shall be held by
both hands, maintain
the horizontal level of
the oil cup, and then
3.Please don't clean the
surface with rough material
like steel wire ball, brush or
coarse cloth, etc. It will
greatly scratch the surface.
4. Please don’t clean
with gasoline, acidic
substance, benzene,
solvent and other
chemical agents. If you
5. If the stainless steel
panel is stained with
salty liquor, disinfectant,
bleaching powder and
other cleanser, please
wipe it by wet cloth at
once and dry it by dry
cloth.
9. Unscrew the screws
on the motor cover, and
dismantle the motor
cover.
1. Change the LED light
：
please contact FOTILE after sales center.
2 .If the range hood still can't work after getting rid of the above malfunctions, please
contact FOTILE service center .
There is machinery shaking noise
Screw is loosed
check whether the surface screws are
tightened or not
Suction power is weak
Close some doors and windows
Noisy
Too long distance between
range hood and stove
Too much ventilation near the
range hood leads to strong
convection
Exhaust pipe surface is
distorted
Reinstall exhaust pipe (done by
professional people)
Lower the range hood installation
height (done by professional people)
10.Unscrew the screws
fixing on the air input
ring, and remove the air
input ring.
12.Unscrew the
locknut in clockwise
direction, and remove
the vane.
downwards for certain degree, remove the ring suction plate. And then hold the air input cover
with left hand, and unscrew the 2 screws fixed on the air input cover with cross-screwdriver by
right hand, then remove the air input cover.
need to clean, please use neutral cleanser,
and wipe dry the appliance surface by soft
cloth after cleaning.
move the oil cup towards the front side of
the range hood, remove the oil cup and
discharge the accumulated oil.
11.loosen the screw, take
off the air inlet
13.Screw off the locknut
clockwisely, Take out
the impeller
Installation
Packing List
Complete Appliance
1
1
Aluminum Foil Tape
Pothook
1
1
Oil Cup
Wooden Screw
4.5x50
Exhaust Pipe
1
7
