4
3
Forbidden
Hot Flue
Impeller
■
Firstly, let's be familiar with the range hood control interface.
Usage
RANGE HOOD
Please clean the range hood according to the user manual,
otherwise, it may catch fire or cause other dangers.
Don’t transform, stretch, tie, ballast or extrude the power cord,
or it may cause electric shock or fire.
Don’t change the internal wiring by yourself, otherwise, it will
cause possible abnormality and personal injury; and the
improper repair leads to electric shock, fire or other dangers.
The waste air from the range hood couldn’t share the same
flue with other imflamble gas.
Don’t let the stove work without pot otherwise it will damage
the above range hood.
Don’t touch the bulb which is still working or finish working for
a short while, to avoid scalding.
Don’t put your hands or other things into impeller when it is
working to avoid hurting.
All electrical parts including motor, switch and connections,
etc. should be away from water. Don’t rinse range hood directly
with water. Don’t use the range hood when it is wet to prevent
electric shock.
Never touch the power plug, power switch or other electric
parts with wet hand, otherwise, it may cause electric shock.
Operation Instruction
When is touched, the range hood will standby for operation. If there is no operation
on stand it will be turned off automatically.
When is touched, the rang hood is working on or on standby, the hood will also be
turned off automatically after 2 minutes, and the light indicator will be flashing.
■
Turn On/Off, Time delay Function
When is touched under the standby or operational mode, all indicator lamps are
light; after the range hood maintaining for 5 seconds under the Auto turbo mode, and
then returns to the normal mode and operate at the strong grade, the indicator lamp
of button is semi-lighting, and the flue resistance shall be checked automatically,
when the flue resistance is larger than the setting value, the motor turns to the Auto
turbo mode to run automatically, at this time, the indicator lamp of button is fully-
lighting; if the flue resistance restores to the normal condition, then after 30 seconds,
it returns to the normal mode to run at the strong grade. If you want to close such
function, press .
■
Suction Function
Control panel of EMS9016
Touch the button , the motor shall be started; the indicator lamp of button is
fully-lighting, and the range hood is running at the strong grade; then touch the button
again, the indicator lamp of button is semi-lighting, the range hood is running at
weak grade, touch again, the motor is closed.
Auto Turbo button
Strong/weak grade button
Lamp
Power and delay button
Light band
Press the “ ”button, the light is turned on, and press the button again, the light is off.
■
Illumination Function
