FOTILE EMS6008, Operation And Installation Manual

Page: 26 / 34

- 14 - - 15 -
Front and rear fume collection range of the range hood
The following accessories must be purchased separately (please contact the authorized Fotile branch)
Main body
(axonometric
drawing)
1 Wing plate 1
+
Exhaust duct 1
+
Outlet housing 1
Foil tape 1 Upper gasket 1
Hook 1
Product instruction
manual
1
Warranty card 1 Adapter 1
Hook screw
ST4.2×36mm 6
Wood screw
ST5×65mm 4
Ceramic tile
expansion tube
φ5.3×32mm
4
Gypsum board
expansion tube
φ4×40mm
6
Screw for outlet
housing M4×18mm
8
Screw for exhaust
duct
ST3.9×9.5mm
4
Screw for fan frame
M4×6mm
2
Decorative cover
screw
ST2.9×19mm
2
(Only for
EMS6008-C)
Fan cover
1
(Only for
EMS6008-C)
Decorative cover
1
(Only for
EMS6008-C)
Decorative cover
hook
1
(Only for
EMS6008-C)
Cover accessories list
Fan cover 1 Decorative cover 1
Decorative cover
hook
1
Hook screw
ST4.2×36mm
2
Packing List
Left and right fume collection range of the range hood
Fume Collection Range
Note
：
1.The installation height of the range hood is the recommended value (this height is the
clearance value, i.e. the distance between the supporting surface of the cooking appliance
on the stove and the lowest part of the range hood). The diagram of the collocation between
the cupboard and the range hood is for reference only.
2. Please pay attention to the clearance between the exhaust fume collecting hood of the
range hood and the cupboard on both sides before installation or disassembly.
3.If there is a relevant local law specifying the installation of range hood,it is suggested
that you comply with such relevant laws. The suction effect might be influenced.
INADEQUATE
Rangehood smaller than cooking zone Rangehood same size as cooking zone Rangehood larger than cooking zone
ADEQUATE OPTIMAL
INADEQUATE
Rangehood smaller than cooking zone Rangehood same size as cooking zone Rangehood larger than cooking zone
ADEQUATE OPTIMAL
≤580mm 600mm ≥620mm
Side View Side View Side View