12
ENGLISH
troubleshooting
Problem
Possible cause
Remedy
You cannot activate or
operate the appliance.
The appliance is
not connected to
an electrical supply
or it is connected
incorrectly.
Check if the appliance is
correctly connected to
the electrical supply. Refer
to “
Electrical connection
”
chapter.
The fuse is released. Make sure that the
fuse is the cause of the
malfunction.
If the fuse releases again
and again, contact a
qualified electrician.
It’s been more than
20 seconds from the
switching on of the
appliance.
Activate the appliance again
and set the heat setting in
less than 20 seconds.
You touched 2 or
more sensor keys at
the same time.
Touch only one sensor key.
There is water or fat
stains
on the control panel.
Clean the control panel.
The hob deactivates.
You put something on
the sensor key ON-
OFF.
Remove the object from the
sensor key.
Residual heat indicator
does not come on.
The zone is not hot
because it operated
only for a short time.
If the zone operated
sufficiently long to be hot
contact an Authorised
Service Centre.
The sensor keys become
hot.
The cookware is too
large or you put it too
near to the controls.
Put large cookware on the
rear zones if possible.
The heat setting changes
between two levels.
Power management
function operates.
Refer to “
Using the cooktop
”
chapter.
comes on.
The Child Lock
function operates.
Refer to “
Using the cooktop
”
chapter.
uguale per tutti i BIE
