21
● Access to your camera from a Web
Browser, and go to
Settings > Detector >
Motion Detection
. Check the
Enable
; after
completing the settings, click
Save
button
to enable Motion Detection.
a).
Trigger interval:
The interval time between two motion detection.
b).
Alarm actions
: The way that you want to be notified when a motion is detected
:
Sound:
Please select
Camera Sound
or
PC Sound
if you want the camera to alarm when it detects a motion;
NOTE: If you selected ‘PC Sound’, please make sure that your computer has connected with a speaker.
Send E-mail:
If you want to receive an E-mail when the camera detects a motion, please select
Send E-mail
,
and you will need to set up your email information first otherwise camera will fail to send you the alarm
E-mail; Check page 20 in this User Manual for how to setup your E-mail;
Take Snapshot:
If you select this action, camera will take a snapshot automatically when it detects a motion;
Recording:
If you want to
record a video
when your camera detects a motion, you will need to select this
action; The alarm video will be stored at the storage location you set up for this camera (You can only store
the alarm video at your camera’s SD Card or your FTP, but if you activate your cloud service, the alarm video
will be stored at Foscam Cloud server at the same time).