14
●Tap button for Alternate Setup
；
?
Step 5. Complete the settings
Scan QR code
?
Other Setup Methods
Find My Camera
UID/DDNS/IP
UID/DDNS/IP
UID
DDNS
IP Address
Add
●Tap
UID/DDNS/IP
button for the settings.
Now you can choose UID, DDNS or IP Address to add camera to Foscam App:
●
UID:
Please check UID, and type in your camera’s UID, where is located at the bottom of your camera;
●
DDNS:
If you want to use DDNS to add your camera, please make sure that you have completed
Port
Forwarding
Settings
,
Static IP Address setting
and
DDNS setting
(Please check page 9 to page 14 in this User Manual);
●
IP Address:
This should be your
WAN IP address
if you want to add your camera remotely, and please make
sure that you have completed
Port Forwarding Settings
,
Static IP Address setting
and
WAN IP Settings
(Please check page 7 to page 12 in this User Manual);
Choose one of these methods mentioned above, and type in the according paremeters; Tap
Add
to complete
the settings.
NOTE: After you completed these settings, Foscam App will require you to login the camera with the camera’s
user name and password, if you didn’t set any username or password before, the default username should be
‘admin’ (without ‘ ’), and there is no password.