www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
17
maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the
frame rate above 15, you can achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should
combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will
lead to video cannot play well.
You can reset the stream type on
Settings-> Video-> Video Settings
panel. ( chapter 4.4.1).
After changing, please re-login the camera and you can see the modification.
Section4
IR LED Lights
Click IR LED Lights and there are two modes to adjust the infrared led: Auto and Off . The default mode is
Auto.
Auto:
Select it and the camera will adjust the infra led (on or off) automatically.
Manual:
Select it and turn off the infra led manually.
Section5
Image quality settings
In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.
Section6
OSD
If you have added time and camera name in the video, you can see it in the live window.
Go to
Settings ---Basic settings---Camera name
panel, and you can change another device name. The
default device name is anonymous.
Go to
Settings ---Basic settings---Camera time
panel and adjust the device time.
Go to
Settings ---Video---On Screen Display
panel, you can add or no add OSD.
Section7
Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button