www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
19
: Start cruise.
: Stop cruise.
If you want to define or change the cruise trace, please go to
Settings
PTZ
Preset Settings
panel.
How to do cruise?
Firstly:
Select one track in the track dropdown list
Secondly:
Click Start cruise button, the camera will cruise following the predefined path.
Thirdly:
Click stop button and finish cruising.
Preset settings
IPCAM supports 16 preset positions, which is considered enough for DIY home & small business surveillance
market
The default preset position is Topmost, Bottom most, Left most, right most, you can add other preset positions.
Add
Click this icon to save the position you need the camera to remember
Delete
Select one preset position and click this button to delete it.
GO
Select one preset position in the preset dropdown list and click Go to make the camera move the
preset position
How to do preset position?
Firstly,
move the camera and stop at a desired place where you want make preset position.
Secondly,
click
button and enter a descriptive name for the preset position. The preset position cannot
contain special characters. Then click OK to save it. If you want to reset the preset position, click Cancel.
After that, you can move the camera and stop at another place, and set another preset position. You can do all
the 16 preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from the preset
Select one of these
