www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
69
Add:
Select one preset points and add it to the selected cruise track.
Delete:
Select one preset points you have added to one cruise track, click delete.
Move up/ down:
Select one cruise track, adjust the order of preset points in one cruise track.
Attention:
Considering the life time and thermal issue of the motor, it’s not recommend to do long-time cruise.
4.7.3 Start-Up Options
Here section will allow you to set the stop position after the camera reboots.
It supports three modes: No self test, Goto home position and Goto preset point.
No self test:
When rebooting, the camera will not pan / tilt.
Goto home position:
When rebooting, the camera will pa Providing Central Management Software to
manage or monitor multi-cameras n / tilt and stops at center.
Goto Preset point:
Select one preset position and save it. When rebooting, the camera will pan/ tilt and stops
at the preset position you have set.
4.7.4 Guard Position Settings
After setting the guard position, your camcorder will automatically return to the guard position within a
predetermined time (manually setting) when it stops moving (manually or cruise). You could refer to the
following method:
