10. Taking out of Service and Disposal
10 Taking out of Service and Disposal
10.1 Taking out of Service
Safety
u
Observe the safety instructions. See
.
Taking out of Service
Taking the Blackbird OECD out of service:
1.
Switch off the power supply.
Figure 38: E-2000/APC connector and socket
1
Locking mechanism
2
Connector
3
Protective cover
4
Socket
5
Dust cap
2.
Disconnect the optical connections:
a)
Release the locking mechanism (1) of the connector (2).
b)
Remove the connector (2) from the socket (4).
c)
Attach a dust cap (5) on the socket (4).
d)
Repeat the procedure for all sensors.
3.
Remove the power cable from the PWR connector.
4.
Remove the RJ45 cable from the ETH connector.
5.
Remove the CAN cable from the CAN connector.
6.
Secure the Blackbird OECD against falling down.
78 / 83
MDE1117_4-10_1.3.x_5.0_Blackbird
OECD_(6Ch, CNO)-en-us
© fos4X 2020
Summary of Contents for Blackbird OECD MDE1117
Page 83: ......
