User’s Manual
15
Press “Menu” button until you see “Colour Mix”. Scroll “UP” or “DOWN” to select the color, then
press “Enter” to confirm the color selection. Now press “UP” or “DOWN” to set color intensity.
Press “ENTER” to save your setting. Press “MENU” to exit from current setup.
When the fixture is switched off and then on again, the fixture will go back to what it was set at.
5.6 IR Remote Control
This operation mode allows users to control the fixture with an infrared remote controller. The
remote controller can help you to achieve almost all functions.
To control your fixture with IR controller, please set up Wireless DMX to “Off”.
To activate IR remote control, press “Menu” until “IR” appears, press “Up” or “Down” button and
select “On”. Press “Enter” to save the setting.
To control the fixture with this IR remote controller, make sure to point the controller directly to
the IR receiving sensors on the product. Make sure there are no objects between the controller
and the fixture.
1 - Set the fixture into blackout (LED on/off).
2 - Adjust auto, strobe & fade speed, sound sensitivity,
DMX address, DMX channel, brightness etc.
3 - Run auto mode, use “Speed” button followed by the
buttons to adjust auto speeds.
4 – Run sound program, use
bottons to adjust
sound sensitivity.
5 – Run strobe program, use
buttons to adjust
strobe speed.
6 – Set auto/fade speed, Press this button followed by
buttons to adjust program speed.
7 – Set the fixture into master or slave mode.
Summary of Contents for Luminus NANO
Page 19: ...User s Manual 18 MEMO...
