User’s Manual
14
5.2 Master/Slave Mode
The fixture has a built-in wireless DMX transceiver inside. Fixtures can operate Master/Slave
mode wirelessly. In Master/Slave mode, one fixture will work as Master fixture, other fixtures in
the daisy chain will work in synchronization with the Master fixture.
Please refer to “
4.5.2 Pairing Between Mater/Slave Fixtures”.
If you set your fixture as
“Transmit”, it will work as Master unit, fixture(s) set as “Receive” will work as slave unit(S).
5.3 Auto Run Mode
The fixture has preset color mixing and fading programs that can be activated from the OLED
control panel for auto running. To access this, follow below steps:
-
Press button “Menu” until “Program” appears.
-
Press “Up” or “Down” to scroll up/down to select “Auto”;
-
Press “Enter” to adjust running speed by pressing “Up/Down”;
-
Press “Enter” to save your settings.
5.4 Sound Mode
The fixture can operate at sound mode to activate built-in programs with music.
Continue pressing “Menu” till “Program” appears. Press “Up” or “Down” to scroll up/down to
select “Sound”. Press “Enter” to save the setting.
Press “Up” or “Down” to adjust sound sensitivity from high to low (from 1 to 16).
5.5 Colour Mix
Users are allowed to program their own color effects and save to your fixture in “Colour Mix”.
13 CH
11
Auto
161-190
CMY colour changing
191-220
RGBY colour changing
221-255
RGBYCMY colour changing
12
Speed
0-255
Speed from slow to fast
13
Sound
0-10
No function
11-90
Colour dimming
91-170
Colour changing
171-252
Colour ch Strobe
253-255
Colour d
Colour cstrobe
Summary of Contents for Luminus NANO
Page 19: ...User s Manual 18 MEMO...
