User’s Manual
11
till you see “Wireless DMX”, press Up/Down to select “Clear ID” and press “Enter” to
clear wireless DMX memory. Then the blue light will turn off in about 5 seconds.
To pair fixture and a new transmitter, after clearing the fixture wireless DMX memory
(make sure wireless DMX indicator is Off), press the pairing button on the transmitter,
fixture indicator will start to fast flashing and then stay on, this means pairing succeeds.
Once the fixture has been linked to a specific transmitter, it will remain linked to that
unit units it is linked to another one by clearing the initial wireless DMX signal.
4.5.2 Pairing Between Mater/Slave Fixtures
Before pairing between master and slave fixtures, make sure you have already cleared
wireless DMX memory of the slave fixtures, this mean all slave wireless DMX indicator
should be off.
Now continue pressing “Menu” till you see “Wireless DMX”, press Up/Down to select
“Transmit” and press “Enter”. Then the wireless DMX indicator on the master fixture
and all slave fixtures will start fast flashing, and then stay on. Now pairing succeeds.
Now you can operate your fixtures wilrelessly in Master/Slave mode.
4.5.3 Clear Wireless DMX Memory
To clear wireless DMX signal, continue pressing “Menu” till you see “Wireless DMX”,
press Up/Down to select “Clear ID” and press “Enter” to erase old wireless DMX signal.
Wireless DMX indicator will turn off in 5 seconds.
If your fixture is a master unit (i.e. it is in wilreless DMX transmit mode), the wireless
DMX memory of of both Master unit and Slave units wil be erased at the same time.
If your fixture is a slave unit, you cleared wireless DMX momery of that fixture only.
Summary of Contents for Luminus NANO
Page 19: ...User s Manual 18 MEMO...
