8
3.2
2.4G Wireless DMX Connection Method
3.2.1 Working mode
2.4G wireless DMX transceiver uses the W-DMX communication protocol which has two working modes
：
Transmit mode and Receive mode.
Find
【
Set
】
menu and press
【
ENTER
】
to enter system settings menu.
Press
【
UP/DOWN
】
key to select
【
Wireless 2.4g
】
to enter 2.4g wireless
DMX settings menu.
【
WIRELESS
】
for wireless DMX control ON/OFF.
【
CONNECT
】
means the
paired connection of wireless
DMX module.
【
RESET
】
means reset the data of wireless DMX
control setting,
【
MODE
】
has transmitting mode and receiving
mode.
WORKING
MODE
ACTION
STATUS DESCRIPTION
W-DMX
Receive
White
Connection is not established
Red fast flash
Connection is lost
Green fast flash
Connecting to transmitter
Green slow flash
Connected. Without DMX signal
Green
Connected. Receiving DMX signal
W-DMX
Transmit
Red
Deleting all receivers’ connection
Blue fast flash
Connecting with the Receiver(s)
Blue slow flash
No DMX signal input
Blue
Transmitting DMX signal
Note:
The wireless transceiver will remember the chosen protocol even after you disconnect the power supply.
There is no need for repeated setting.
