14
Installation Instructions
STEP 16: Dishwasher Wet Test
• Turn on power supply (or plug power cord into outlet,
if equipped).
• T urn on your dishwasher (please refer to the Own-
er’s Manual for instructions).
• Close door, select RINSE ONLY cycle and press
START/CANCEL.
• Check to be sure that water enters the dishwasher If
water does not enter the dishwasher check to be sure
that water and power are turned on.
• Check for leaks under the dishwasher If a leak is
found, turn power supply off, then tighten connections.
Restore power after leak is corrected.
• Check for leaks around the door A leak around the
door could be caused by door rubbing or hitting against
adjacent cabinetry. Reposition the dishwasher if neces-
sary. See Step 9.
• When the dishwasher is draining, check the drain
lines. If leaks are found, turn power off at the breaker and
correct plumbing as necessary. Restore power after
corrections are made. See Step 12.
• Open dishwasher door and make sure most of the
water has drained. If not, check that disposer plug has
been removed and/or air gap is not plugged. See Step
13. Also check drain line for kinking.
• Run the dishwasher through another fill and drain
cycle. Check for leaks and correct if required.
STEP 17: Replace Toe Kick
STEP 18: Literature
Be sure to leave complete literature package and instal-
lation instructions with consume
